Main content
Course: Multivariable calculus > Unit 5
Lesson 6: Stokes' theorem (articles)Stokes' theorem
This is the 3d version of Green's theorem, relating the surface integral of a curl vector field to a line integral around that surface's boundary.
Background
Not strictly required, but very helpful for a deeper understanding:
This article is for physical intuition
If you would like examples of using Stokes' theorem for computations, you can find them in the next article. Here, the goal is to present the theorem in such a way that you can get a gut feeling for what it is really saying, and why it is true.
What we're building to
- Stokes' theorem is the 3D version of Green's theorem.
- It relates the surface integral of the curl of a vector field with the line integral of that same vector field around the boundary of the surface:
Interpreting a line integral in 3D
Let represent a three-dimensional vector field.
Think of this vector field as being the velocity vector of some gas, whooshing about through space.
Now let be some closed curve inside this vector field.
How can you interpret the line integral of around ?
Well, first of all, this integral doesn't make sense until the curve is oriented. The differential vector represents a tiny step along the curve, but in which direction? In three dimensions, you can't just say "clockwise" or "counterclockwise", since that will depend on where you are in space when you look at the curve. I'll address how we specify orientation mathematically below, but for now, it's easier to just draw an orientation:
Imagine you are a bird, flying through space along the curve while the wind blows according to the vector field . (For the purposes of this animation, you are a sphere-shaped bird).
Think of each step (wing-flap?) of your motion along as being the tiny vector . Consider the dot product between and the wind-velocity-vector from the field where you are. It will be positive when the wind is helping you, and negative when it is in your face.
Now look back at the line integral I originally asked about:
You can think of this as adding up how helpful or burdensome the wind was during your flight. It measures the tendency of the fluid flow to circulate around . If it is positive, the wind was generally helpful, and you could say that it tends to circulate around in the direction of your specified orientation. If it is negative, you could say it tends to circulate the other way.
Chopping up a surface
Those of you who read the Green's theorem article will find what follows very familiar.
Consider a surface in space whose boundary is the curve , as if was a wire loop that you just dipped in soap, and is the beginnings of a soap bubble emerging from the loop.
Slice this surface in half, and name the boundaries of the two resulting pieces and . If they are each oriented the same way was, the line integrals (of the same vector field ) around each of these smaller curves cancel out along the slice that you made:
The portions of and which remain make up the original boundary . So the sum of the line integrals around the smaller pieces equals the full line integral around :
More generally, imagine slicing up into many, many really small pieces, name their boundaries , and orient them all the same way as . It gets messy drawing this in 3D, so I'll just steal an image from the Green's theorem article showing the 2D version, which has essentially the same intuition.
The line integrals around all of these little loops will cancel out along the slices within , leaving only something equal to the line integral around itself.
Curl on each piece
The reason for chopping up like this is that the line integral around a very small loop can be approximated using curl. Specifically, zoom in on a specific one of those pieces. If it's small enough, you can think of it as basically being flat.
- Name the boundary of this piece
. - Choose some point
on the surface, inside this little loop. - Let
be a unit normal vector to the surface at the point . "Pointing which way?", you might ask. Curl the fingers of your right hand around the little loop so that they align with its orientation. Stick out your thumb, and this is the direction of . - Let
represent the area of this little piece (in anticipation of using an infinitesimal area for a surface integral in just a bit).
Then the line integral of around can be approximated as follows:
If you feel uneasy about your intuition for what curl means, or how a vector can represent rotation, consider reviewing this article on curl.
Here's the loose intuition for why this approximation works: is a vector which tells you how the fluid flowing along the vector field tends to rotate near the point . For example, if you imagine a small tennis ball floating in space, centered at the point , the vector describes the way it will tend to spin due to the wind blowing around it. That is to say, the vector is directed along the axis of rotation, and its magnitude is proportional to the rate of rotation.
When we take the dot product between this curl vector and , the unit normal vector to the surface, it extract the component of the curl vector which is perpendicular to the surface. This will describe the rate of fluid rotation on the surface itself. On the other hand, that little bit of fluid rotation is also described by the line integral around the boundary of the tiny piece: .
Actually, that line integral produces a really small number (since is very short), but produces a number which doesn't care about the size of the piece containing . This is why we scale down the relevant component of curl by the area of the tiny piece.
(For a deeper understanding of this approximation, take a look at the formal definition of curl in three dimensions.)
Surface integral of curl
Combining the ideas of the last two sections, here's what we get:
As we chop things up more and more finely, this last sum approaches the surface integral of over the surface . (If this does not make sense to you, consider reviewing the article on surface integrals).
Putting this together, we have the following marvelous equation, known as Stokes' theorem:
Aligning orientation
Surfaces are oriented by the chosen direction for their unit normal vectors. For example, you will often see a surface oriented using outward-facing unit normal vectors (although not all surfaces have a notion of outward-facing vs. inward-facing unit normal vectors).
Curves are oriented by the chosen direction for their tangent vectors.
For Stokes' theorem to work, the orientation of the surface and its boundary must "match up" in the right way. Otherwise, the equation will be off by a factor of . Here are several different ways you will hear people describe what this matching up looks like; all are describing the same thing:
- If you look at the surface in such a way that the unit normal vectors are all pointed towards your face, the curve should be oriented counterclockwise.
- The curve's orientation should follow the right-hand rule, in the sense that if you stick the thumb of your right hand in the direction of a unit normal vector near the edge of the surface, and curl your fingers, the direction they point on the curve should match its orientation.
- When you are walking along the boundary curve with your body pointing out in the direction of the unit normal vector, you should be walking in such a way that the surface is to your left side.
Blowing bubbles
Here's something pretty awesome about Stokes' theorem: The surface itself doesn't matter, all that matters is what its boundary is.
For example, imagine a particular loop through space, and think about all the different surfaces that could have this loop as a boundary; all the different soap bubbles which could emerge from this one loop:
For any given vector field , the surface integral will be the same for each one of these surfaces. Isn't that crazy! These surface integrals involve adding up completely different values at completely different points in space, yet they turn out to be the same simply because they share a boundary.
What this tells you is just how special curl vector fields are, since with most vector fields, the surface integral absolutely depends on the specific surface at hand. If you learned about conservative vector fields, this is analogous to path independence, and how it indicates just how special gradient vector fields are.
What if there is no boundary?
If you have a closed surface, like a sphere or a torus, then there is no boundary. This means the "line integral over the boundary" is zero, and Stokes' theorem reads as follows:
If you think back to chopping up the surface to get many tiny little line integrals, this basically says all those little line integrals cancel out with nothing left to show for their work.
Summary
- Stokes' theorem is the 3D version of Green's theorem.
- The line integral
tells you how much a fluid flowing along tends to circulate around the boundary of the surface . - The left-hand side surface integral can be seen as adding up all the little bits of fluid rotation on the surface
itself. The vector describes the fluid rotation at each point, and dotting it with a unit normal vector to the surface, , extracts the component of that fluid rotation which happens on the surface itself.
Want to join the conversation?
- Who is the author of these articles? Very well done!(42 votes)
- Does Strokes' theorem have something to do with Gauss' law of magnetism? I learned it as ∮B · d A = 0, but maybe it should have been ∯B · n dΣ = 0 (over S, I can't type it under the integral).(7 votes)
- Yes. Good question!
Strokes' theorem is very useful in solving problems relating to magnetism and electromagnetism. BTW, pure electric fields with no magnetic component are conservative fields. Maxwell's Equations contain both curl and divergence.(9 votes)
- I think it's crazy to say that the area of a surface is the same as that of a circumference of a boundary line on the same 3D object. Like...we know this is intuitively false. So that's why I don't think that the Stoke's theorem is saying this. But I think that's the intuition and conceptual picture I (and other students maybe) have. I think there's some kind of "spcial-ness" of a boundary line and that it is not just a circumference of an irregular shaped circle round a 3D object. I wish this could be clarified.(4 votes)
- I'm confused why stoke's theorem calculates the flux and not just circulation in 3d? Because green's theorem calculates circulation so wouldn't stokes an extension of that do the same?(3 votes)
- Hey Stokes theorem doesn't calculates the flux, it can be done by divergence theorem instead it tells us how much of the vector field is with us as we move along the closed curve C (mainly counterclockwise).....(3 votes)
- What a wonderful exposition!(3 votes)
- How is ds equal to curl of partial derivatives ..
I saw on the book ds=dxdy/n.k^ which i also couldn't understand(3 votes) - How does dΣ, a small piece of surface area, play into evaluating overall rotation? I know that dΣ is the differential used for surface integrals, but I don't understand how it applies here.(2 votes)
- What should I do when the direction of the unit vector and tangent vector don't match up? Devide by -1?(2 votes)
- There's a catch with the "Walk this way around C" picture. It's wrong. :)(1 vote)